Phoenix i Hybrid Wheelchair
Contact us for pricing
The Phoenix i brings completely new levels of mobility to the active wheelchair user. Featuring our revolutionary front wheel power assist discreetly integrated into a stunning carbon fibre frame. All Phoenix i wheelchairs are hand crafted to order.
Every item can be trialled before you decide.
See it in everyday life
Short clips of the Phoenix i in use: over rough ground, out for a coffee, indoors at work, and up close at the control dial. Nothing plays until you press play.
Kerbs, gravel and everything in between
The Phoenix i is a manual wheelchair with front wheel power assist built into a carbon fibre frame. It runs full time, at multiple power levels, indoors and out.
Carpet, hills, gravel, grass and snow are all easily overcome, and two 150W motors easily overcome stone chips and other obstacles.
Electronic braking on every hill
Never again grip slippery hands rims to slow your wheelchair on hills – the Phoenix i features all weather electronic braking. The feeling gained from a new ease of getting around after long term use of a conventional wheelchair is joyous. Coast hands free with an ease no conventional wheelchair can match.
Control and agility, indoors and out
Unparalleled control and agility in small indoor spaces to all weather off roading, the Phoenix i brings what you need in under 7kgs transfer weight. Carpet, hills, gravel, grass & snow are all easily overcome. Travel forward, backward, turn 360°, coast hands free with ease.
Power & control
- Electronic braking for downhill and quick stopping.
- Power assist with multiple power levels for indoor and outdoor use.
- Powered steering and agility
- Reduce manual pushing by 80% preserving joints and energy.
- High torque for uphill
- 2 x 150W Motors
Everyday practicality
- Low maintenance with plug and play spares.
- Hard wired control – No Bluetooth
- 6.5kg transfer weight
- 2 x 150W motors easily overcome stone chips and other obstacles
- Easy grip, rotate and press control dial.
Carbon Fibre Frame
- Never run out of power with quick release, interchangeable batteries.
- Carbon/Kevlar, flexible, supportive backrest.
- Shock absorbing caster forks.
- Single piece carbon fibre construction.
- Solid carbon fibre seat.
- Carbon fibre anti vibration footrest with rubber dampers.
A single piece of carbon fibre
Every Phoenix i is hand crafted to order around a one-piece carbon fibre frame, with a solid carbon fibre seat, a flexible Carbon/Kevlar backrest and an anti vibration footrest on rubber dampers.
- 6.5kgtransfer weight
- 2 x 150Wmotors
- 80%less manual pushing
Opens in a new tab. Every item can be trialled before you decide.
Accessories for the Phoenix i
The Phoenix Bag System is the accessory range built for this chair. The bags clip to the Phoenix i rather than sitting on your lap, and the telescopic trolley adjusts to fit every bag in the range.
Phoenix Bag System
- Cabin, Shopping, Large, XL and Rucksack bags, plus the Phoenix System telescopic trolley.
- Smaller bags connect to larger bags, so your cabin and hold luggage move in one go.
- The bags protect and secure the trolley when you travel, and are not separated at check-in.
- Most chairs with a straight backrest bar click straight on. A minimum 25mm gap between backrest and back bar is needed, and some frames need a low-clearance adapter, sold separately.
Spares for the Phoenix i itself are plug and play. Tell us how you use your chair and we will check what you need against your frame before you order.
You might also consider
Omeo Personal Mobility Device
Hands-free, balance-based personal mobility. 0-degree turning circle, up to 50km range, and an off-road kit that goes almost anywhere.
Enquire about the Phoenix i
Tell us a little about what you need and we'll come back to you. We can arrange a free trial, talk through NDIS funding, or just answer questions.
- Free trials available
- NDIS plan managed & self managed welcome
- Victoria wide · free delivery within 150km
Prefer email? info@keytoindependence.com.au